This is an old revision of the document!
source TriDAS/pixel/POSRelease/setenv.sh cd TriDAS/pixel/BPixelTools/ccu ./run.bsh
scanccu FEC 0x0 Ring 0x0 CCU 0x7e found FEC 0x0 Ring 0x0 CCU 0x7d found FEC 0x0 Ring 0x0 CCU 0x7c found FEC 0x0 Ring 0x0 CCU 0x7b found FEC 0x0 Ring 0x0 CCU 0x7a found FEC 0x0 Ring 0x0 CCU 0x79 found FEC 0x0 Ring 0x0 CCU 0x78 found FEC 0x0 Ring 0x0 CCU 0x77 found scanringedevice prints list of all i2c devices
source TriDAS_r45/pixel/POSRelease/setenv.sh cd TriDAS_r45/pixel/PixelRun ./run.sh --xml auto
go to http://cmspixel2.psi.ch:1973/ click on "PixelSupervisor" click "Initialize" select calibration to run click "Configure" check that FED phases have been found click "Start" Once the calibration finished. Look at the results in: cd TriDAS_r45/pixel/PixelRun/Runs/Run_0/Run_yourrunnr
Keep track of your results by entering them in this elog: (user and password are the same as to access testing PC). https://elog.physik.uzh.ch:8080/PixelPOS/ Enter sector, run number and calibration and additional information if needed.