User Tools
single_small_ccd_module_support
This is an old revision of the document!
Table of Contents
Single Small CCD Module Support Frame and Die Box
As a byproduct of the Large CCD Module production there are also very small CCD Modules, which are used in DARMA. For this small CCD we also developed a CCD Mounting case and a container. The two BOM can be found Single Small CCD and Small Singel CCD Container
| Name | Assembly Diagramm | Part Drawings | STEP Files |
|---|---|---|---|
| Frame | Frame | Top Frame Bottom Frame Rectangular Spacer Cylindrical Spacer | Bottom Frame Step File Cylindrical Spacer Rectangular Spacer Top Frame |
| Container | Container | Container Bottom Container Middle Container Top Container Retention Bar | Container Bottom Container Middle Container Top Retention Bar |
| Flex | Not Available | Flex | Flex |
| PCB | PCB | PCB | |
| Assembly | Container Mounting Assembly Cryovessel Assembly | Not available | |
BOM Single Small CCD Frame
| Assembly | Description | Category | Quantity | Weight (kg) | Material | Manufacturer | Original Part No. | Supplier |
|---|---|---|---|---|---|---|---|---|
| Single Small CCD Frame | M1.6 x 5 Cross Recessed flat countersunk head Screw | Screws | 12 | 0.001 | Stainless Steel | Bossard | 5512816 | Bossard |
| Small CCD Top Support Frame | Machined Part | 1 | 0.022 | Aluminum | UZH Workshop | UZH Workshop | ||
| Small CCD Bottom Support Frame | Machined Part | 1 | 0.004 | Aluminum | UZH Workshop | UZH Workshop | ||
| Single CCD Rectangular Frame Spacer | Machined Part | 2 | 0.003 | Aluminum | UZH Workshop | UZH Workshop | ||
| Single CCD Cylindrical Frame Spacer | Machined Part | 1 | 0.002 | Aluminum | UZH Workshop | UZH Workshop |
BOM Small CCD Single Die Box
| Assembly | Description | Category | Quantity | Common | Weight (kg) | Material | Manufacturer | Original Part No. | Supplier |
|---|---|---|---|---|---|---|---|---|---|
| Small CCD Single Die Box | M1.6 x 5 Cross Recessed flat countersunk head screw | Screws | 6 | No | 0.001 | Stainless Steel | Bossard | 5512816 | Bossard |
| M2 x 12 Cross Recessed flat countersunk head screw | Screws | 4 | No | 0.001 | Stainless steel | Bossard | 1156365 | Bossard | |
| M1 x 4 Slotted Cheese head screw | Screws | 1 | No | 0.001 | Stainless steel | Bossard | 1421646 | Bossard | |
| Container Top | Machined Part | 1 | No | 0.087 | Aluminum | UZH Workshop | UZH Workshop | ||
| AlN CCD support PCB with centering pocket | AlN PCB | 1 | No | 0.002 | AlN | ||||
| Container Middle | Machined Part | 1 | No | 0.033 | Aluminum | UZH Workshop | UZH Workshop | ||
| Retention Bar | Machined Part | 1 | No | 0.001 | 1 mm Al Sheet | UZH Workshop | UZH Workshop | ||
| 3.5 mm diameter M3 nitril ESD rubber plunger | Plunger | 1 | No | 0.001 | ESD Nitril | Schmalz | PFYN 3.5 NBR-ESD-55 M3-AG | Schmalz | |
| Container Botttom | Machined Part | 1 | No | 0.059 | Aluminum | UZH Workshop | UZH Workshop | ||
| 30 cm long CCD Flex Cable | Flex cable | 1 | No | 0.006 | Capton |
single_small_ccd_module_support.1753855792.txt.gz · Last modified: by simon
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
