User Tools
single_small_ccd_module_support
Table of Contents
Single Small CCD Module Support Frame and Die Box
As a byproduct of the Large CCD Module production there are also very small CCD Modules, which are used in DARMA. For this small CCD we also developed a CCD Mounting case and a container. The two BOM can be found Single Small CCD and Small Singel CCD Container
| Name | Assembly Diagramm | Part Drawings | STEP Files |
|---|---|---|---|
| Frame | Frame | Top Frame Bottom Frame Rectangular Spacer Cylindrical Spacer | Bottom Frame Step File Cylindrical Spacer Rectangular Spacer Top Frame |
| Container | Container | Container Bottom Container Middle Container Top Container Retention Bar | Container Bottom Container Middle Container Top Retention Bar |
| Flex | Not Available | Flex | Flex |
| PCB | PCB | PCB | |
| Assembly | Container Mounting Assembly Cryovessel Assembly | Not available | |
BOM Single Small CCD Frame
| Assembly | Description | Category | Quantity | Weight (kg) | Material | Manufacturer | Original Part No. | Supplier |
|---|---|---|---|---|---|---|---|---|
| Single Small CCD Frame | M1.6 x 5 Cross Recessed flat countersunk head Screw | Screws | 12 | 0.001 | Stainless Steel | Bossard | 5512816 | Bossard |
| Small CCD Top Support Frame | Machined Part | 1 | 0.022 | Aluminum | UZH Workshop | UZH Workshop | ||
| Small CCD Bottom Support Frame | Machined Part | 1 | 0.004 | Aluminum | UZH Workshop | UZH Workshop | ||
| Single CCD Rectangular Frame Spacer | Machined Part | 2 | 0.003 | Aluminum | UZH Workshop | UZH Workshop | ||
| Single CCD Cylindrical Frame Spacer | Machined Part | 1 | 0.002 | Aluminum | UZH Workshop | UZH Workshop |
BOM Small CCD Single Die Box
| Assembly | Description | Category | Quantity | Common | Weight (kg) | Material | Manufacturer | Original Part No. | Supplier |
|---|---|---|---|---|---|---|---|---|---|
| Small CCD Single Die Box | M1.6 x 5 Cross Recessed flat countersunk head screw | Screws | 6 | No | 0.001 | Stainless Steel | Bossard | 5512816 | Bossard |
| M2 x 12 Cross Recessed flat countersunk head screw | Screws | 4 | No | 0.001 | Stainless steel | Bossard | 1156365 | Bossard | |
| M1 x 4 Slotted Cheese head screw | Screws | 1 | No | 0.001 | Stainless steel | Bossard | 1421646 | Bossard | |
| Container Top | Machined Part | 1 | No | 0.087 | Aluminum | UZH Workshop | UZH Workshop | ||
| AlN CCD support PCB with centering pocket | AlN PCB | 1 | No | 0.002 | AlN | ||||
| Container Middle | Machined Part | 1 | No | 0.033 | Aluminum | UZH Workshop | UZH Workshop | ||
| Retention Bar | Machined Part | 1 | No | 0.001 | 1 mm Al Sheet | UZH Workshop | UZH Workshop | ||
| 3.5 mm diameter M3 nitril ESD rubber plunger | Plunger | 1 | No | 0.001 | ESD Nitril | Schmalz | PFYN 3.5 NBR-ESD-55 M3-AG | Schmalz | |
| Container Botttom | Machined Part | 1 | No | 0.059 | Aluminum | UZH Workshop | UZH Workshop | ||
| 30 cm long CCD Flex Cable | Flex cable | 1 | No | 0.006 | Capton |
Assembly
| Single Small CCD Frame | ||||
|---|---|---|---|---|
| Step | Part | No. | Weight (kg) | |
| 1st Step | Single Small CCD Frame Assembly | |||
| 4-40 UNC x 3/8 Inch Socket Countersunk Nylon Screws (ASME B18.3) | 6 | 0.001 | ||
| M1.6×5 Cross Recessed flat countersunk head Screw | 10 | 0.001 | ||
| Rectangular CCD Frame Spacer | 2 | 0.003 | ||
| Cylindrical CCD Frame Spacer | 1 | 0.002 | ||
| Al2O3 Insulator | 1 | 0.080 | ||
| Heater Assembly | 1 | 0.342 | ||
| Small CCD Top Support Frame | 1 | 0.220 | ||
| Small CCD Bottom Support Frame | 1 | 0.004 | ||
| Total: | 23 | 0.662 | ||
| 2nd Step | Single Small CCD Assembly | |||
| Single Small CCD Frame Assembly | 1 | 0.662 | ||
| Temperature Sensor Housing | 1 | 0.006 | ||
| Platinum Resistance Pt100 Wire-Wound Detector Element, 28 mm | 1 | 0.005 | ||
| M3x8 Hex socket head cap screws fully threaded | 1 | 0.001 | ||
| M3 Flat washers without chamfer | 1 | 0.001 | ||
| Single Large CCD Module | 1 | 0.200 | ||
| Total: | 6 | 0.875 | ||
| 3rd Step | Small CCD Cryovessel Support Assembly | |||
| Single Small CCD Assembly | 1 | 0.875 | ||
| Cryostat Complete | 1 | 49.526 | ||
| 4-40 UNC x 0.5625 Hex socket head cap screws, ANSI B18.3 | 6 | 0.001 | ||
| Total: | 8 | 50.407 | ||
| Small CCD Single Die Box | ||||
| 1st Step | M1.6 x 5 cross countersunk screws | 6 | 0.006 | |
| M2 x 12 cross countersunk screws | 4 | 0.004 | ||
| M1 x 4 slotted cheese head screws | 1 | 0.001 | ||
| Container Top | 1 | 0.087 | ||
| Container Middle | 1 | 0.033 | ||
| Container Bottom | 1 | 0.059 | ||
| Retention Bar | 1 | 0.001 | ||
| 3.5 mm M3 nitril ESD rubber plunger | 1 | 0.001 | ||
| AlN CCD support PCB | 1 | 0.002 | ||
| 30 cm long CCD Flex Cable | 1 | 0.006 | ||
| Total: | 18 | 0.19959 | ||
single_small_ccd_module_support.txt · Last modified: by simon
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
