User Tools
single_large_ccd_module_support
Table of Contents
Large CCD Single Module Support
Since the Large CCD Modules are quite expensive and hard to come by a single large Module holder was developed.
| Name | Assembly Diagramm | Part Drawings | STEP Files |
|---|---|---|---|
| Sides | Top Frame Bottom Frame | Bottom Frame Cylindrical Spacers Left Frame Rectangular Spacers Right Frame Top Frame | Bottom Frame Step File Cylindrical Spacer Left Frame Step File Rectangular Spacer Right Frame Top Frame |
| Assembly | Cryovessel Assembly Complete Assembly | Not Available | |
BOM
| Assembly | Description | Category | Quantity | Weight (kg) | Material | Manufacturer | Original Part No. | Supplier |
|---|---|---|---|---|---|---|---|---|
| Large CCD Single Module Support | M1.6×5 Cross Recessed flat countersunk head Screw | Screws | 16 | 0.001 | Stainless Steel | Bossard | 5512816 | Bossard |
| Large CCD Module Top Frame | Machined Part | 1 | 0.053 | Aluminum | UZH Workshop | UZH Workshop | ||
| Large CCD Module Bottom Frame | Machined Part | 1 | 0.010 | Aluminum | UZH Workshop | UZH Workshop | ||
| Large CCD Module Right Frame | Machined Part | 1 | 0.014 | Aluminum | UZH Workshop | UZH Workshop | ||
| Large CCD Module Left Frame | Machined Part | 1 | 0.014 | Aluminum | UZH Workshop | UZH Workshop | ||
| Rectangular Large CCD Frame Spacer | Machined Part | 4 | 0.003 | Aluminum | UZH Workshop | UZH Workshop | ||
| Cylindrical Large CCD Frame Spacer | Machined Part | 1 | 0.002 | Aluminum | UZH Workshop | UZH Workshop |
Assembly
| Step | Part | No. | Weight (kg) |
|---|---|---|---|
| 1st Step | Single Large CCD Top Frame Assembly | ||
| 4-40 UNC x 3/8 Inch Socket Countersunk Nylon Screws (ASME B18.3) | 6 | 0.001 | |
| M1.6×5 Cross Recessed flat countersunk head Screw | 10 | 0.001 | |
| Rectangular CCD Frame Spacer | 4 | 0.003 | |
| Cylindrical CCD Frame Spacer | 1 | 0.002 | |
| Al2O3 Insulator | 1 | 0.080 | |
| Heater Assembly | 1 | 0.342 | |
| Large CCD Module Top Frame | 1 | 0.060 | |
| Total: | 24 | 0.508 | |
| 2nd Step | Single Large CCD Bottom Frame Assembly | ||
| Single Large CCD Top Frame Assembly | 1 | 0.508 | |
| M1.6×5 Cross Recessed flat countersunk head Screw | 2 | 0.001 | |
| Large CCD Module Bottom Frame | 1 | 0.010 | |
| Total: | 4 | 0.519 | |
| 3rd Step | Single Large CCD Assembly | ||
| Single Large CCD Bottom Frame Assembly | 1 | 0.519 | |
| Large CCD Module Right Frame | 1 | 0.14 | |
| Large CCD Module Left Frame | 1 | 0.14 | |
| Temperature Sensor Housing | 1 | 0.006 | |
| Platinum Resistance Pt100 Wire-Wound Detector Element, 28 mm | 1 | 0.005 | |
| M1.6×5 Cross Recessed flat countersunk head Screw | 4 | 0.001 | |
| M3x8 Hex socket head cap screws fully threaded | 1 | 0.001 | |
| M3 Flat washers without chamfer | 1 | 0.001 | |
| Single Large CCD Module | 1 | ||
| Total: | 12 | 0.663 | |
| 4th Step | Large CCD Cryovessel Support Assebly | ||
| Single Large CCD Assembly | 1 | 0.663 | |
| Cryostat Complete | 1 | 49.526 | |
| 4-40 UNC x 0.5625 Hex socket head cap screws, ANSI B18.3 | 6 | 0.001 | |
| Total: | 8 | 50.195 | |
single_large_ccd_module_support.txt · Last modified: by simon
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
