ccd_box
Table of Contents
CCD Box
Four 6×1.5 k CCD are placed inside a box, which is wirebonded to a flex, which connects to the pass through of the Test chamber. The pass through does invert the connection, this is corrected by the wirebonding of the CCD. In the below chapters there are the pin layouts of the samtec and DB50 connector, including the schematics and other files.
Pin Layout Samtec
| Samtec, CCD Box - Pass Trough | |
| CCD side | |
| Samtec | |
| Function | Pin |
| P_Plus | 1 |
| P_Plus | 2 |
| P_Plus | 3 |
| D50_VOUT_L1 | 4 |
| Vdd_2 | 5 |
| P_Plus | 6 |
| Vdd_1 | 7 |
| D50_VOUT_L2 | 8 |
| Drain_2 | 9 |
| P_Plus | 10 |
| Drain_1 | 11 |
| D50_VOUT_U1 | 12 |
| VR_2 | 13 |
| P_Plus | 14 |
| VR_1 | 15 |
| D50_VOUT_U2 | 16 |
| P_Plus | 17 |
| P_Plus | 18 |
| P_Plus | 19 |
| P_Plus | 20 |
| P_Plus | 21 |
| P_Plus | 22 |
| TG_2 | 23 |
| TG_1 | 24 |
| V3_2 | 25 |
| V3_1 | 26 |
| V2_2 | 27 |
| V2_1 | 28 |
| V1_2 | 29 |
| V1_1 | 30 |
| P_Plus | 31 |
| P_Plus | 32 |
| P_Plus | 33 |
| P_Plus | 34 |
| H3L | 35 |
| H3U | 36 |
| H2L | 37 |
| H2U | 38 |
| H1L | 39 |
| H1U | 40 |
| DG_2 | 41 |
| DG_1 | 42 |
| RG_2 | 43 |
| RG_1 | 44 |
| P_Plus | 45 |
| P_Plus | 46 |
| SW_2 | 47 |
| SW_1 | 48 |
| OG_2 | 49 |
| OG_1 | 50 |
| P_Plus | 51 |
| P_Plus | 52 |
| N_Plus | 53 |
| P_Plus | 54 |
| N_Plus | 55 |
| P_Plus | 56 |
| P_Plus | 57 |
| P_Plus | 58 |
| P_Plus | 59 |
| VSUB | 60 |
| GND_1 | 61 |
| GND_2 | 62 |
| GND_3 | 63 |
| GND_4 | 64 |
Pin Layout DB50 connector
| DB 50, CCD Box | ||
| CCD Box side | ||
| DB 50 Male | ||
| Function | Pin | |
| Bottom Row | H2U | 1 |
| H1U | 2 | |
| OG_2 | 3 | |
| SW_2 | 4 | |
| TG_2 | 5 | |
| N/C | 6 | |
| Drain_1 | 7 | |
| Drain_2 | 8 | |
| Vdd_1 | 9 | |
| VR_1 | 10 | |
| VR_2 | 11 | |
| Vdd_2 | 12 | |
| N/C | 13 | |
| SW_1 | 14 | |
| OG_1 | 15 | |
| H1L | 16 | |
| H2L | 17 | |
| Middle Row | H3U | 18 |
| V1_2 | 19 | |
| V2_2 | 20 | |
| V3_2 | 21 | |
| N/C | 22 | |
| P_Plus | 23 | |
| P_Plus | 24 | |
| P_Plus | 25 | |
| P_Plus | 26 | |
| P_Plus | 27 | |
| N/C | 28 | |
| TG_1 | 29 | |
| V1_1 | 30 | |
| V2_1 | 31 | |
| V3_1 | 32 | |
| H3L | 33 | |
| Top Row | VSUB | 34 |
| P_Plus | 35 | |
| RG_2 | 36 | |
| DG_2 | 37 | |
| N/C | 38 | |
| P_Plus | 39 | |
| D50_VOUT_U2 | 40 | |
| D50_VOUT_U1 | 41 | |
| D50_VOUT_L1 | 42 | |
| D50_VOUT_L2 | 43 | |
| P_Plus | 44 | |
| N/C | 45 | |
| N/C | 46 | |
| RG_1 | 47 | |
| DG_1 | 48 | |
| N/C | 49 | |
| N/C | 50 | |
| Shield | Shield | P_Plus |
Schematics and other files
| Type | Schematics | SPC | ASM | Gerber |
|---|---|---|---|---|
| DB50 connector | DB50 schematics | N/A | N/A | N/A |
| Samtec connector | Samtec schematics | Samtec SPC | Samtec ASM | Samtec Gerber plots |
| Flex Extension UZH | UZH Flex Extension schematics UZH Flex Pcb files | |||
| Flex Extension Washington | Washington flex extension schematics | Washington flex extension SPC | Washington Flex extension ASM | Washington Flex extension Gerber |
ccd_box.txt · Last modified: 2024/11/12 15:36 by simon
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
