This is an old revision of the document!

Different configuration of the Pixel Detector have been studied to determine which one would be the best to have a good resolution for pt and impact parameters for tracks. For the tracks we are interested in the pt range compatible with the one of tracks coming from a b-hadron decay (pt~ 3.5 GeV).

We bin our measurement in 4 pt region: 1 Gev,2 GeV, 5GeV ,20 GeV. And we consider 3 eta region: C ( eta< 0.8), I (eta< 1.6), F (eta<2.4).

We use different scenarios:

• TP- Technical Proposal: 4 Layers for the BP with pixel with the same resolution as the Run I in Phase I (13 um x 28 um); sensor: 100 um x 150 um, thickness T=0.3 mm ; innermost layer at 3 cm from the beampipe and the outermost layer 16.1 cm.

• TP with outer layer at 18.8 cm.

• TP but one layer (the 3rd one at radius=10.9 cm) removed.

• TP with better resolution (7um x 15 um) sensors in first layer.

• TP with better resolution (7um x 15 um) sensors in first layer (sensor thickness = 0.225 in the first Layer). [ If the pixel size is decrezed 75 um x 100 um, to have the same charge sharing between pixel that we have in the Run I, the thickness shoud be reduced]

• TP with better resolution (7um x 15 um) sensors in first layer, increasing material of the first layer [ the better resolution pixel has an area that is half compared to the Run I pixel. So in the same detector there will be a double number of pixel and an increase of the material, especially for the read-out].

• TP with better resolution (7um x 15 um) sensors in all 4 layers, (pixel thickness =0.225 in all Layers).

• TP with better resolution (7um x 15 um) sensors in all 4 layers, increasing material in all layers.

• Strawman5 configuration is expalind in https://test-lantonel-tklayout.web.cern.ch/test-lantonel-tklayout/Strawman_5/indexpixel.html (with material changes in the tracker, and the reference resolution of 10 um x 15 um).

• Strawman5, with better resolution (7um x 15 um) sensors in 2 innermost ( and extension ) layers, Phase I resolution (13 um x 28 um) sensors in 2 layers.

• Strawman5, with better resolution (7um x 15 um) sensors in 2 innermost ( and extension ) layers, Phase I resolution (13 um x 28 um) sensors in 2 layers, (pixel thickness =0.225 in 2 layers).

• TP with the number of pixels quadrupled. [Just to test]

The results are reported in the tables: file:/Users/cgalloni/Phase2Upgrade/tklayout/TechnicalProposal2014_Just3Layers/index.html