Differences

This shows you the differences between two versions of the page.

--- phase1:phase1:remoteconnection [2016/08/26 12:10] – created ngadiuba
+++ phase1:phase1:remoteconnection [2016/08/26 12:17] (current) – ngadiuba
@@ Line 1: / Line 1: @@
+====== How to start the setup from remote ======
   * Ask someone to switch on CRATE and power supply
   * ssh to the cmspixel computer (only from uzh internal linux cluster)
@@ Line 5: / Line 8: @@
   password: uzh2014
-  * ssh to the cmspixel computer (only from uzh internal linux cluster)
+  * start the CAEN and power on the components
+   telnet 172.19.4.176 1527
+   username: user
+   password: user
+   Main --> Channels
+   Enable (last column to the right) and power on CH0011 and CH0013 for CCU and POH motherboard
+   Power on CH0006 and CH0001 for the modules
+  * run a quick check that everything is connected and powered
+  cd ~/TriDAS/pixel/BPixelTools/ccu/
+  source setup.bsh
+  ./run.bsh
+  * if everything is fine you will get this result
+  FEC 0x15 Ring 0x8 CCU 0x7e found
+  FEC 0x15 Ring 0x8 CCU 0x7d found
+  FEC 0x15 Ring 0x8 CCU 0x7c found
+  FEC 0x15 Ring 0x8 CCU 0x7b found
+  FEC 0x15 Ring 0x8 CCU 0x7a found
+  FEC 0x15 Ring 0x8 CCU 0x79 found
+  FEC 0x15 Ring 0x8 CCU 0x78 found
+  FEC 0x15 Ring 0x8 CCU 0x77 found

CMS Wiki Pages