• if you run from remote follow first these instructions
• start xdaq applications:

cd ~/ph1_TriDAS/
source setenv.sh
cd pixel/PixelRun
killall xdaq.exe
./run_UZHLabTest.sh ../XDAQConfiguration/XDAQ_ConfigurationUZHLabTest_TTC.xml

• open the browser and go to the PixelSupervisor web interface (if you run from remote you'll have to launch firefox remotely), the click on “Initialize”

http://cmspixel.physik.uzh.ch:1953/urn:xdaq-application:lid=51/Default

• set a configuration for a quick check that modules, FED and POHs are working:

cd ~/ph1_TriDAS/pixel/config/calib/3
cp calib_simple.dat calib.dat

• run a TBMDelay calibration clicking on the corresponding button in the PixelSupervisor menu, then click on “Configure”. Once it's configured click on “Start”.

• if everything worked you will see an output similar to this:

Contents of FIFO 1 for channel 32 (status = 11)

Decoded channel: 32
Found TBM header: 1
Found TBM trailer: 1
Event number: 10
ROCs enabled: 0
TBM trailer errors: 0
Found ROCs without hits: 4
   - ROC #1 - last dac : 8
   - ROC #2 - last dac : 8
   - ROC #3 - last dac : 8
   - ROC #4 - last dac : 8
Found ROCs with hits: 4
Total number of hits found: 4
   - Channel #32 ROC #1 dcol 5 pxl 140 col 10 row 10 pulse height 252
   - Channel #32 ROC #2 dcol 5 pxl 140 col 10 row 10 pulse height 207
   - Channel #32 ROC #3 dcol 5 pxl 140 col 10 row 10 pulse height 255
   - Channel #32 ROC #4 dcol 5 pxl 140 col 10 row 10 pulse height 243