This is an old revision of the document!
TKFEC 0, ring 0x0, CCU 0x7c PXFEC 0, ring 0x0 FED1 Module hub address 31 (TBM08c) connected to CBL12 CON 212 Using POH2 channel 0x11 Connected to FED fiber 5
This needs to be done after each power up of the crate.
Login to cmspixel2 PC
source TriDAS/pixel/POSRelease/setenv.sh cd FEDtool source setup.sh
Edit write destination in FEDtool/settings/FWUpload.xml
(one board at a time, naming listed in /etc/hosts)
fpgaconfig -l #list firmware files on SD card fpgaconfig -i firmware.bin #load firmware from SD card
In case of a newly received firmware available in bit format:
fpgaconfig -f firmware.bit -i firmware.bin #convert .bit to .bin, upload to SD card and load firmware
cd FEDTools amc13test settings/HWDescription.xml
cd TriDAS/pixel/BPixelTools/ccu ./run.bsh > reset > scanccu > ccu 0x7c