LHCb Wiki Pages

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Emacs ======
===== Good to know =====
==== Cutting out a rectangle ====
To cut out a rectangle in emacs, mark the region in question with your mouse (upper left to lower right). Then press <code>
ctrl-x r k
</code>, which will cut out the rectangular region.
Paste the rectangular region with 
<code>
ctrl-x r y
</code>
==== Search for a string ====
If you want to search for a string, type
<code>
ctrl-s
</code>
If you want to search the same string as before, press:
<code>
ctrl-s ctrl-s
</code>

===== Configuring Emacs=====
==== Mousewheel on lxplus ====
If you use emacs on lxplus, the mousewheel isn't enabled. To add this functionality, open your ''~/.emacs'' file and write in the following lines:
<code>
;; ====== mouse wheel 
;; ====== define scrolling functions 
(defun up-slightly () (interactive) (scroll-up 5))
(defun down-slightly () (interactive) (scroll-down 5))

(defun up-one () (interactive) (scroll-up 1))
(defun down-one () (interactive) (scroll-down 1))

(defun up-a-lot () (interactive) (scroll-up))
(defun down-a-lot () (interactive) (scroll-down))

(defun scroll-up-half ()
"Scroll up half a page."
(interactive)
(scroll-up (/ (window-height) 2))
)
(defun scroll-down-half ()
"Scroll down half a page."
(interactive)
(scroll-down (/ (window-height) 2))
)

;; ====== set mouse wheel to scrolling function 
;; ====== press shift + (mousewheel) for slow scrolling and 
;; ====== ctrl + (mousewheel) for fast scrolling 
(global-set-key [(mouse-5)] 'up-slightly)
(global-set-key [(mouse-4)] 'down-slightly)
(global-set-key [S-mouse-4] 'down-one)
(global-set-key [S-mouse-5] 'up-one)
(global-set-key [C-mouse-4] 'down-a-lot)
(global-set-key [C-mouse-5] 'up-a-lot)

</code>
The first four blocks of code define function for different scrolling speeds. In the second part, the mousewheel is assigned to a scrolling speed. Pressing ''shift'' oder ''ctrl'' while scrolling will alter the speed.

==== Numberpad on lxplus ====
By default, the keys on the numberpad are overloaded with different functionalities when using emacs in the LHCb environment on lxplus. If you want the standard numberpad, add the following to the ''~/.emacs'' file:
<code>
(defun setnumpad()
  (interactive)
  (global-set-key [kp-decimal] '".")
  (global-set-key [kp-subtract] '"-")
  (global-set-key [kp-enter] '"\C-q \C-j")
  (global-set-key [kp-0]   '"0")
  (global-set-key [kp-1]   '"1")
  (global-set-key [kp-2]   '"2")
  (global-set-key [kp-3]   '"3")
  (global-set-key [kp-4]   '"4")
  (global-set-key [kp-5]   '"5")
  (global-set-key [kp-6]   '"6")
  (global-set-key [kp-7]   '"7")
  (global-set-key [kp-8]   '"8")
  (global-set-key [kp-9]   '"9")
 )

(defun setnonumpad()
  (interactive)
  (load (expand-file-name "$EMACSDIR/edt"))
)
</code>
After emacs has started, type ''alt-x setnumpad'' to activate the normal numberpad. If you want to deactivate it, type ''alt-x setnumpad''. (Note: This is not very sophisticated, as just the configuration file is loaded again.)

==== Adding goto-line ====
A useful little command when coding with emacs is **goto-line**. To assign it a shortcut, add in your ''~/.emacs'': 
<code>
;; == goto line ==
(define-key global-map "\C-xg" 'goto-line)
</code>
Goto-line then is executed with ''ctrl-x g''.

==== Changing the font permanently ====
To permanently change the font in emacs, do the following:
  * Type ''xfontsel'' in a terminal. A window will appear. Choose your desired font by selecting ''fndry'', ''fmly'', etc. You will end up with a string that exactely describes your font.
  * Start emacs and go to the *scratch* buffer. Type: ''prin1-to-string (x-list-fonts "font-you-whant-to-check or pattern"))'' where you put in the selected font from xfontsel. Place the cursor after the last closing parenthesis and type CTRL-j. A list of available fonts with the given pattern will appear.
  * Open your .emacs file and add the following line: 
<code>
(set-default-font "the font you want to choose")
</code>
for example
<code>
(set-default-font "-adobe-courier-medium-r-normal--12-120-75-75-m-70-iso8859-10")
</code>
  * Close emacs and restart it. Your default font should now be set to the font you chose.
Physik-Institut

LHCb Wiki Pages

User Tools

Site Tools

Page Tools
