Differences

This shows you the differences between two versions of the page.

--- pages [2024/09/19 13:57] – simon
+++ pages [2024/09/19 13:58] (current) – [RAID] simon
@@ Line 2: / Line 2: @@
 On the following pages you find additional information regarding our Server and how to set it up.
-==== Remote Access ====
+===== Remote Access =====
 Install [[https://www.zi.uzh.ch/en/support/network/vpn_ISAC.html|UZH VPN]] and follow the guide there to get access to the UZH VPN.
@@ Line 21: / Line 21: @@
-==== Network configuration ====
+===== Network configuration =====
 The computer is configured to act as a router and a gateway between the internal network connecting all devices of the experimental setup and the rest of the UZH infrastructure. Effectively, devices on the internal network are hidden from the outside, while they can still access the internet.
@@ Line 53: / Line 53: @@
 Once tcpdump is present, once can continuously monitor traffic by issuing:
     sudo tcpdump -i any icmp
+===== RAID =====
+To configure a system in any kind of RAID mode you have to set the jumper like shown here. Then with F8 enter the BIOS settings and change the Main Board to RAID mode.
+{{ :server:server:raidsetting.png?400|}}
+----
+The systems will most propably not see the RAID mode, we were unable to localize/solve this issue. The only thing that did work was installing a RAID card. Then the following jumper has to be modified accordingly: {{ :server:server:raid_card.png?400|}}
+After doing so press Ctrl+A to enter the RAID card settings and set up the Disks accordingly.
+----

Physik-Institut

Physik-Institut DAMIC Wiki

Differences

Physik-Institut

Physik-Institut DAMIC Wiki

User Tools

Site Tools

Differences

Page Tools