Differences

This shows you the differences between two versions of the page.

--- users:rdelburgo [2018/10/04 11:30] – delburgo
+++ users:rdelburgo [2018/10/11 16:45] (current) – [Run a test (work in progress)] delburgo
@@ Line 22: / Line 22: @@
     ifdown eth0; ifup eth0
 And check if the board is there:
-    ping 92.168.10.16
+    ping 192.168.10.16
 ====== Kintex firmware installation ======
+Get the right firmware here **[[https://gitlab.cern.ch/silab/bdaq53/tags | tag]]**
+If not already installed, install the **[[https://www.xilinx.com/products/design-tools/vivado.html | VIVADO ]]**software then:
   * Connect the KC705 with the computer through JTAG connector.
@@ Line 31: / Line 33: @@
   * now the KC705 should appear if it is properly connected.
   * Right click on the card and go to add configuration memory and follow the steps indicated in the **[[ https://gitlab.cern.ch/silab/bdaq53/wikis/Hardware/fpga-configuration | bdaq53 twiki]]** to program using flash memory (I recommend this method because even if you turn off the FPGA permanently programmed) .
 ====== bdaq53 installation ======
   * Install **[[https://conda.io/miniconda.html | conda]]** for python
@@ Line 41: / Line 42: @@
   * RD53A twiki:  https://gitlab.cern.ch/silab/bdaq53/
+====== Run a test (work in progress)======
+**powering procedure missing on purpose, ask to someone who had already done it**
+   cd bdaq53/
+   source setup.py develop
+   bdaq53 --help
+choose a test (for example scan_digital) and
+   bdaq53 scan_digital
+====== Module Calibration (work in progress)======
+TBD
+====== Run the cross talk scan  (work in progress)======
+the cross talk scan is not in the bdaq53 scan list but nevertheless is present inside the scan folder. To run it:
+   cd bdaq53/bdaq53/scans/
+   python scan_crosstalk.py

Physik-Institut

CMS Wiki Pages

Differences

Physik-Institut

CMS Wiki Pages

User Tools

Site Tools

Differences

Page Tools