This is an old revision of the document!
A simple test to figure out what the material parameters do:
Use Technical proposal benchmark as reference:
Default material is written down in this file: tkgeometry/config/stdinclude/PixelMaterials.cfg
M Si 0 0 0 0.3 mm L ;
pt 1000 Real 2.30948 Ideal 0.53651 Loss 4.3
d 1000 Real 0.00601 Ideal 0.00241 Loss 2.5
z0 1000 Real 0.00696 Ideal 0.00273 Loss 2.5
Changing the following: M Si 0 0 0 3 mm L ;
pt 1000 Real 4.00824 Ideal 0.53651 Loss 7.5