This is an old revision of the document!
A simple test to figure out what the material parameters do:
Use Technical proposal benchmark as reference:
Default material is written down in this file: tkgeometry/config/stdinclude/PixelMaterials.cfg
Modules: masses taken from TOB modules / 2 M Si 0 0 0 0.3 mm L ; pt 1000 Real 2.30948 Ideal 0.53651 Loss 4.3 d 1000 Real 0.00601 Ideal 0.00241 Loss 2.5 z0 1000 Real 0.00696 Ideal 0.00273 Loss 2.5 Changing the following: M Si 0 0 0 3 mm L ; pt 1000 Real 4.00824 Ideal 0.53651 Loss 7.5