User Tools

Site Tools


phase1:phase1:remoteconnection

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Last revisionBoth sides next revision
phase1:phase1:remoteconnection [2016/08/26 12:13] ngadiubaphase1:phase1:remoteconnection [2016/08/26 12:16] ngadiuba
Line 5: Line 5:
   password: uzh2014   password: uzh2014
  
-  * start the CAEN+  * start the CAEN and power on the components
  
    telnet 172.19.4.176 1527    telnet 172.19.4.176 1527
Line 14: Line 14:
    Enable (last column to the right) and power on CH0011 and CH0013 for CCU and POH motherboard    Enable (last column to the right) and power on CH0011 and CH0013 for CCU and POH motherboard
    Power on CH0006 and CH0001 for the modules    Power on CH0006 and CH0001 for the modules
 +
 +  * run a quick check that everything is connected and powered
 +
 +  cd ~/TriDAS/pixel/BPixelTools/ccu/
 +  source setup.bsh
 +  ./run.bsh
 +
 +  * if everything is fine you will get this result
 +
 +  FEC 0x15 Ring 0x8 CCU 0x7e found
 +  FEC 0x15 Ring 0x8 CCU 0x7d found
 +  FEC 0x15 Ring 0x8 CCU 0x7c found
 +  FEC 0x15 Ring 0x8 CCU 0x7b found
 +  FEC 0x15 Ring 0x8 CCU 0x7a found
 +  FEC 0x15 Ring 0x8 CCU 0x79 found
 +  FEC 0x15 Ring 0x8 CCU 0x78 found
 +  FEC 0x15 Ring 0x8 CCU 0x77 found
 +    
phase1/phase1/remoteconnection.txt · Last modified: 2016/08/26 12:17 by ngadiuba