Differences

This shows you the differences between two versions of the page.

--- phase1:phase1:pos [2016/09/13 12:00] – ngadiuba
+++ phase1:phase1:pos [2016/09/14 11:25] (current) – ngadiuba
@@ Line 120: / Line 120: @@
   tkfecconfig   0
   lowvoltagemap   0
-===== Run full calibration chain (to be finished) =====
+) edit the calib.dat file with the input parameters of the new calibration (ex: what to scan, scan range, etc..). For the example above the file should stay under **config/calib/25/calib.dat**
+===== Calibration sequence =====
+  * The calibration sequence is described in [[https://indico.cern.ch/event/560056/contributions/2292179/attachments/1330727/1999885/phase1-calibrations.pdf|this]] presentation.
+  * The calibrations parameters can be found in the corresponding calib.dat file in the config/calib directory (check the config/aliases.txt file to know which subfolder you should look at)
+  * A detector configuration for switch 0 and switch 1 of the fitel receiver to use for testing calibrations can be found in [[https://elog.physik.uzh.ch:8080/Pixel/168|this elog entry]]

CMS Wiki Pages