Differences

This shows you the differences between two versions of the page.

--- phase1:phase1:pos [2016/09/13 10:34] – ngadiuba
+++ phase1:phase1:pos [2016/09/14 11:25] (current) – ngadiuba
@@ Line 88: / Line 88: @@
 ) create your calibration classes: PixelMyCalibration and PixelFEDMyCalibration (follow for instance PixelTBMDelayCalibration and PixelFEDTBMDelayCalibration classes)
-) add the new calibration to the file config/aliases.txt
+) add the new calibration to the file **config/aliases.txt**
-===== Run full calibration chain (to be finished) =====
+  ...
+  Gain99By3        19 ;
+  GainBy3          20 ;
+  Iana             21 ;
+  ROCDelay         22 ;
+  ReadbackCalibration 23 ;
+  Vdig 24 ;
+  MyCalibration 25 ;
+) add the calibration key to the file **config/configurations.txt**
+  ...
+  key 25
+  detconfig   0
+  nametranslation   0
+  fedconfig   0
+  fecconfig   0
+  fedcard   0
+  dac   0
+  maxvsf   0
+  mask   0
+  trim   0
+  calib   25
+  tbm   0
+  portcard   0
+  portcardmap   0
+  ttcciconfig   0
+  ltcconfig   0
+  tkfecconfig   0
+  lowvoltagemap   0
+) edit the calib.dat file with the input parameters of the new calibration (ex: what to scan, scan range, etc..). For the example above the file should stay under **config/calib/25/calib.dat**
+===== Calibration sequence =====
+  * The calibration sequence is described in [[https://indico.cern.ch/event/560056/contributions/2292179/attachments/1330727/1999885/phase1-calibrations.pdf|this]] presentation.
+  * The calibrations parameters can be found in the corresponding calib.dat file in the config/calib directory (check the config/aliases.txt file to know which subfolder you should look at)
+  * A detector configuration for switch 0 and switch 1 of the fitel receiver to use for testing calibrations can be found in [[https://elog.physik.uzh.ch:8080/Pixel/168|this elog entry]]

Physik-Institut

CMS Wiki Pages

Differences

Physik-Institut

CMS Wiki Pages

User Tools

Site Tools

Differences

Page Tools