Differences

This shows you the differences between two versions of the page.

--- mtca:mtca:centos7install [2020/08/14 11:53] – leac
+++ mtca:mtca:centos7install [2022/05/19 14:42] (current) – lnoeht
@@ Line 17: / Line 17: @@
   mkdir ROOT
   cd ROOT
-  git clone --branch v6-22-00-patches https://github.com/root-project/root.git root_src
+  git clone --branch v6-24-00-patches https://github.com/root-project/root.git root_src
   mkdir build  install
   cd build
@@ Line 25: / Line 25: @@
   source install/bin/thisroot.sh
+Configure repositories
+  sudo cat > /etc/yum.repos.d/xdaq.repo <<EOF
+  [xdaq]
+  name=XDAQ Software Core
+  baseurl=http://xdaq.web.cern.ch/xdaq/repo/core/15/cc7/x86_64/RPMS/
+  enabled=1
+  gpgcheck=0
+  [xdaq-worksuite]
+  name=XDAQ Software worksuite
+  baseurl=http://xdaq.web.cern.ch/xdaq/repo/worksuite/15/cc7/x86_64/RPMS/
+  enabled=1
+  gpgcheck=0
+  [xdaq-updates]
+  name=XDAQ Software xaas
+  baseurl=http://xdaq.web.cern.ch/xdaq/repo/xaas/15/cc7/x86_64/RPMS/
+  enabled=1
+  gpgcheck=0
+  EOF
+  sudo cat > /etc/yum.repos.d/amc13-sw.repo <<EOF
+  [cactus-amc13-base]
+  name=CACTUS Project Software Repository for amc13 packages
+  baseurl=http://cactus.web.cern.ch/cactus/release/amc13/1.2/centos7_x86_64/base/RPMS
+  enabled=1
+  gpgcheck=0
+  EOF
+  sudo cat > /etc/yum.repos.d/ipbus-sw.repo <<EOF
+  [ipbus-sw-base]
+  name=IPbus software repository
+  baseurl=http://www.cern.ch/ipbus/sw/release/2.6/repos/centos7_x86_64/base/RPMS
+  enabled=1
+  gpgcheck=0
+  [ipbus-sw-updates]
+  name=IPbus software repository updates
+  baseurl=http://www.cern.ch/ipbus/sw/release/2.6/repos/centos7_x86_64/updates/RPMS
+  enabled=1
+  gpgcheck=0
+  EOF
 Install cactus
-  sudo yum install cactusboards-amc13-tools-1.2.14-0.centos7 cactusboards-amc13-  amc13-1.2.14-0.centos7
+  sudo yum install cactusboards-amc13-tools-1.2.14-0.centos7 cactusboards-amc13-amc13-1.2.14-0.centos7
   sudo yum install cactuscore-uhal-grammars cactuscore-uhal-uhal cactuscore-uhal-tests   cactuscore-uhal-pycohal cactuscore-uhal-gui cactuscore-uhal-tools cactuscore-controlhub cactusboards-amc13-amc13 cactusboards-amc13-tools pugixml-devel
-#install XDAQ
+Install XDAQ
-sudo yum group install cmsos_core cmsos_worksuite --skip-broken
+  sudo yum group install cmsos_core cmsos_worksuite --skip-broken
+Other packages
+  sudo yum install e2fsprogs-devel libuuid-devel curlpp curlpp-devel.x86_64 freetype freetype-devel xorg-x11-fonts-75dpi libuuid-devel libcurl-devel  pugixml-devel boost boost-devel
+Download POS and set environment
+  mkdir TriDAS_lea
+  cd TriDAS_lea
+  scl enable devtoolset-8 bash
+  git clone https://gitlab.cern.ch/cmspops/pos.git pixel
+  cd pixel
+  git checkout master
+  cd ..
+  cp pixel/POSRelease/setenv.sh .
+  cat > local.sh <<EOF
+  export ROOTSYS=/home/cmspixel_centos7/internalhdd/ROOT/install
+  export BUILD_HOME=/home/cmspixel_centos7/internalhdd/TriDAS_lea
+  export POS_INSTALL_PATH=\$BUILD_HOME/local
+  export POS_OUTPUT_DIRS=\$BUILD_HOME/pixel/PixelRun/Runs
+  export POS_LOG_DIR=\$BUILD_HOME/pixel/PixelRun/Logs
+  export PIXELCONFIGURATIONBASE=\$BUILD_HOME/Config
+  EOF
+  source setenv.sh
+Download and compile FecSoftware
+  git clone https://gitlab.cern.ch/cmspos/FecSoftware.git FecSoftwareV3_0
+  cd FecSoftwareV3_0
+  make -j 8
+  make install
+Compile POS
+  cd $BUILD_HOME/pixel
+  make Set=pixel -j 8
+  make install
+  cd $BUILD_HOME/pixel/PixelRun
+  mkdir Logs Runs
+Note: I encountered compilation errors and had to add the line:
+  #include <TSystem.h>
+to these two header files:
+  TriDAS_lea/pixel/PixelUtilities/PixelRootUtilities/include/PixelHistoThreadFrame.h
+  TriDAS_lea/pixel/PixelUtilities/PixelRootUtilities/include/PixelHistoThreadFrameWithArgs.h
+=== Installation of network card on Centos7 ===
+get name of new network card
+  bash
+  ifconfig -a
+gives **enp4s5** for this network card, yours could be different
+create file
+  /etc/sysconfig/network-scripts/ifcfg-enp4s5 (choose the right name for your card)
+with this content:
+  HWADDR=90:E2:BA:F7:6B:F7
+  TYPE=Ethernet
+  PROXY_METHOD=none
+  BROWSER_ONLY=no
+  BOOTPROTO=none
+  DEFROUTE=no
+  IPV4_FAILURE_FATAL=no
+  IPV6INIT=yes
+  IPV6_AUTOCONF=yes
+  IPV6_DEFROUTE=no
+  IPV6_FAILURE_FATAL=no
+  IPV6_ADDR_GEN_MODE=stable-privacy
+  NAME="enp4s5"
+  UUID=8c87de7c-ab31-3faa-8480-3c9571cad2af
+  ONBOOT=yes
+  AUTOCONNECT_PRIORITY=-999
+  IPADDR=192.168.0.1
+  PREFIX=23
+  GATEWAY=192.168.0.1
+(change the HWADDR, the NAME and the UUID to fit your network card)
+restart the network service
+  sudo systemctl restart network.service
+check the ip address change
+  ifconfig -a
+the network card should now have the ip address 192.168.0.1 with the netmask 255.255.254.0
-#other packages
+install the dhcp daemon and wireshark
-sudo yum install e2fsprogs-devel libuuid-devel curlpp curlpp-devel.x86_64 freetype freetype-devel xorg-x11-fonts-75dpi libuuid-devel libcurl-devel  pugixml-devel boost boost-devel
+  sudo yum install dhcpd wireshark
-#install POS
-mkdir TriDAS_lea
-cd TriDAS_lea
-scl enable devtoolset-8 bash
-git clone https://gitlab.cern.ch/cmspops/pos.git pixel
-cd pixel
-git checkout r36     # or the latest tag above, or just master if you want to make a feature branch and do development
-cd ..
-cp pixel/POSRelease/setenv.sh .
-cat > local.sh <<EOF
-export ROOTSYS=/home/cmspixel_centos7/internalhdd/ROOT/install
-export BUILD_HOME=/home/cmspixel_centos7/internalhdd/TriDAS_lea
-export POS_INSTALL_PATH=\$BUILD_HOME/local
-export POS_OUTPUT_DIRS=\$BUILD_HOME/pixel/PixelRun/Runs
-export POS_LOG_DIR=\$BUILD_HOME/pixel/PixelRun/Logs
-export PIXELCONFIGURATIONBASE=\$BUILD_HOME/Config
-EOF
-source setenv.sh
-#get FecSoftware
+install the rarp daemon using the instructions from https://wiki.physik.uzh.ch/cms/nanocrate:nanocrate
-git clone https://gitlab.cern.ch/cmspos/FecSoftware.git FecSoftwareV3_0
+  bash
-cd FecSoftwareV3_0
+  #!/bin/bash
-make -j 8
+  sudo wget http://download-ib01.fedoraproject.org/pub/epel/6/x86_64/Packages/r/rarpd-ss981107-42.el6.x86_64.rpm
-make install
+  sudo yum install rarpd-ss981107-42.el6.x86_64.rpm
+  cat <<EOF > /tmp/rarpd.service
+  [Unit]
+  Description=Reverse Address Resolution Protocol Requests Server
+  Documentation=man.rarpd(8)
+  Requires=network.target
+  After=network.target
+  [Service]
+  Type=forking
+  User=root
+  #EnvironmentFile=/etc/sysconfig/rarpd
+  ExecStart=/usr/sbin/rarpd -a -e -v
+  [Install]
+  WantedBy=multi-user.target
+  EOF
+  sudo cp /tmp/rarpd.service /etc/systemd/system
+restart daemons and rarpdaemon
+  sudo systemctl daemon-reload
+  sudo systemctl restart rarpd
-#compile POS
+this script already is stored at **~/internalhdd/install_scripts/install_rarpd.sh**
-cd $BUILD_HOME/pixel
-make Set=pixel -j 8
-make install
-cd $BUILD_HOME/pixel/PixelRun
-mkdir Logs Runs
-#this would give a compilation error.
-Had to add:
-#include <TSystem.h>
-to two header files:
+copy the **/etc/hosts** and the **/etc/ethers** files from the old mtca PC
-TriDAS_lea/pixel/PixelUtilities/PixelRootUtilities/include/PixelHistoThreadFrame.h
-TriDAS_lea/pixel/PixelUtilities/PixelRootUtilities/include/PixelHistoThreadFrameWithArgs.h
-##############
+**/etc/hosts** contains:
-Repository configuration
+.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
+  ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
+.168.0.41 mch
+.168.0.157 bpixamc13T1
+.168.0.156 bpixamc13T2
+.168.0.31 bpixtkfec
+.168.0.32 bpixpxfec
+.168.0.34 bpixfed1
+.168.0.35 bpixfed2
+.168.0.36 bpixfed3
-sudo cat > /etc/yum.repos.d/xdaq.repo <<EOF
+only copy the lines starting with **192.168.0.**
-[xdaq]
-name=XDAQ Software Core
-baseurl=http://xdaq.web.cern.ch/xdaq/repo/core/15/cc7/x86_64/RPMS/
-enabled=1
-gpgcheck=0
-[xdaq-worksuite]
+**/etc/ethers** contains:
-name=XDAQ Software worksuite
-baseurl=http://xdaq.web.cern.ch/xdaq/repo/worksuite/15/cc7/x86_64/RPMS/
+  # copied from old slc6 mtca PC
-enabled=1
+  # see man ethers for syntax
-gpgcheck=0
+  # ETHERS for BPIX CRATE
+  # #####################
+:00:30:F3:01:d7  bpixamc13T1
+:00:30:F3:01:97  bpixamc13T2
+:00:30:00:23:31  bpixtkfec
+:00:30:00:22:f2  bpixpxfec
+:00:30:00:23:1e  bpixfed1
+:00:30:00:23:34  bpixfed2
+:00:30:00:23:13  bpixfed4
-[xdaq-updates]
+copy all lines
-name=XDAQ Software xaas
-baseurl=http://xdaq.web.cern.ch/xdaq/repo/xaas/15/cc7/x86_64/RPMS/
+try to ping the devices in the **/etc/hosts** file
-enabled=1
-gpgcheck=0
-EOF
+  ping mch
+  ping bpixamc13T1
+  ping bpixamc13T2
+  ping bpixtkfec
+  ping bpixpxfec
+  ping bpixfed1
+  ping bpixfed2
+  ping bpixfed3
-sudo cat > /etc/yum.repos.d/amc13-sw.repo <<EOF
-[cactus-amc13-base]
-name=CACTUS Project Software Repository for amc13 packages
-baseurl=http://cactus.web.cern.ch/cactus/release/amc13/1.2/centos7_x86_64/base/RPMS
-enabled=1
-gpgcheck=0
-EOF
-sudo cat > /etc/yum.repos.d/ipbus-sw.repo <<EOF
-[ipbus-sw-base]
-name=IPbus software repository
-baseurl=http://www.cern.ch/ipbus/sw/release/2.6/repos/centos7_x86_64/base/RPMS
-enabled=1
-gpgcheck=0
-[ipbus-sw-updates]
-name=IPbus software repository updates
-baseurl=http://www.cern.ch/ipbus/sw/release/2.6/repos/centos7_x86_64/updates/RPMS
-enabled=1
-gpgcheck=0
-EOF

Physik-Institut

CMS Wiki Pages

Differences

Physik-Institut

CMS Wiki Pages

User Tools

Site Tools

Differences

Page Tools