CMS Wiki Pages

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Pixel Phase 2 Upgrade - TEPX ====== 

====== Geometry ====== 
=== TEPX Disks z position ===
^ Disk          ^ z position [cm] | 
| D1    | 175     |  
| D2    | 199     |    
| D3    | 225     | 
| D4    | 255     |
{{epixphase2:img041.png?600}}
=== TEPX Disk geometry ===
^ Ring    ^ Module Type ^ Number of Modules ^ Module size [mm2]^Inner Radius [mm] ^Central Radius [mm]^ Outer Radius [mm] | 
| R1    | 2x2     |   20  | 33x44.2  | 62.9   | 85.0  | 107.1 |
| R2    | 2x2     |   28  | 33x44.2  | 99.7   | 121.8 | 143.9 |
| R3    | 2x2     |   36  | 33x44.2  | 136.4  | 158.5 | 180.6 |
| R4    | 2x2     |   44  | 33x44.2  | 173.2  | 195.3 | 217.4 |
| R5    | 2x2     |   48  | 33x44.2  | 209.9  | 232.0 | 254.1 |

{{epixphase2:img045.png?300}}


====== Testing ====== 
  * CROC/RD53B: https://twiki.cern.ch/twiki/bin/viewauth/RD53/RD53BTesting
  * RD53A: https://twiki.cern.ch/twiki/bin/viewauth/RD53/RD53ATesting
  * [[https://twiki.cern.ch/twiki/bin/view/RD53/RD53AInventory|RD53A Chip and Wafer Inventory]]
  * SCC:    https://twiki.cern.ch/twiki/pub/RD53/RD53ATesting/RD53A_SCC_Configuration.pdf
  * SCC schematic: https://twiki.cern.ch/twiki/pub/RD53/RD53ATesting/RD53A_probe_card_schematics.pdf
  * bdaq53: https://gitlab.cern.ch/silab/bdaq53/wikis/home
  * UZH lab testing: https://elog.physik.uzh.ch:8080/RD53Testing/
====== RD53 Test Systems ======

==== Module testing at PSI ====
**[[https://psi-lab.docs.cern.ch/calibrations|Instructions]]**

==== KIT nanoCrate ====
**[[https://wiki.physik.uzh.ch/cms/nanocrate:nanocrate|Instructions]]**  

== IT uDTC firmware documentation == 

[[https://gitlab.cern.ch/cmstkph2-IT/d19c-firmware/-/raw/master/doc/IT-uDTC_fw_manual_v1.0.pdf|IT-uDTC Firmware Manual v1.0]]

==== Kintex setup ====
**[[https://wiki.physik.uzh.ch/cms/users:rdelburgo#bdaq53_installation|Instructions]]**  

====== Naming Conventions ====== 
  * Mechanics: http://www.physik.uzh.ch/~leac/CMSPixel/Phase2/Naming_ePix-Mechanics-June-2018.pdf

====== ROC, sensor and module inventory ======

  * RD53A demo modules: https://espace.cern.ch/Tracker-Upgrade/Pixel_Module/_layouts/15/WopiFrame.aspx?sourcedoc=/Tracker-Upgrade/Pixel_Module/Shared%20Documents/Demo%20modules%20summary.xlsx&action=default
  * UZH summary page: https://docs.google.com/spreadsheets/d/1ZokCUDGEviXYNHV-AOHb614nL1nbM5x6T3iaJedeBKo/edit#gid=891632047
  * RD53A wafer testing results: https://cernbox.cern.ch/index.php/s/hh2IZ8dOnAaYBmD
  * [[https://docs.google.com/spreadsheets/d/1ygEkZFRu9PKAEuwNgA4l0AeZNyWv2DWaB1eT_kpjJZ8|Spreadsheet with list of single-chip cards and TEPX modules tested at PSI and UZH]]
====== Supply tube ======
  * Numbers for components on supply tube: http://www.physik.uzh.ch/~leac/CMSPixel/Phase2/SupplyTube/TEPX_Services_Numbers.xlsx
  * Optical fibers dimension and bending radius: https://indico.cern.ch/event/818371/contributions/3433576/attachments/1844691/3026126/VTRxPlusPigtail_CMSTkMechanics_15may2019.pdf

====== Cooling ======
  * Naming conventions: http://www.physik.uzh.ch/~leac/CMSPixel/Phase2/Cooling/Tracker_Cooling_Naming_rev1.xlsx
  * TEPX 1: http://www.physik.uzh.ch/~leac/CMSPixel/Phase2/Cooling/TEPX-M1-Data-29112019.xlsx
  * TEPX 2: http://www.physik.uzh.ch/~leac/CMSPixel/Phase2/Cooling/TEPX-M2-Data-29112019.xlsx

====== DAQ ======
  * Phase-2 DAQ: https://cms-tracker-daq.web.cern.ch/cms-tracker-daq//Tracker_Cooling_Naming_rev1.xlsx
  * IT DAQ school: https://indico.cern.ch/event/986962/timetable/?view=standard


====== Documents ====== 
  * Phase 2 TDR: https://cds.cern.ch/record/2272264
  * IT service document: http://www.physik.uzh.ch/~leac/CMSPixel/Phase2/ITServices_v2020.1.pdf
  * IT service document (previous version): http://www.physik.uzh.ch/~leac/CMSPixel/Phase2/ITServices_v1.4.pdf
  * VL+: https://espace.cern.ch/project-Versatile-Link-Plus/SitePages/Home.aspx
  * lpGBT specifications: http://www.physik.uzh.ch/~leac/CMSPixel/Phase2/LpGbtxSpecifications-2.pdf
  * module dimensions: https://wiki.physik.uzh.ch/cms/_media/epixphase2:screen_shot_2018-10-08_at_11.07.57.png
====== Manuals ======
  * CROC manual: https://gitlab.cern.ch/rd53/RD53B_Manual/-/jobs/18573689/artifacts/file/RD53B_CMS_Main.pdf
  * RD53A manual: https://cds.cern.ch/record/2287593
  * RD53B users guide: https://cds.cern.ch/record/2754251
  * RD53B design specifications: http://cds.cern.ch/record/2663161
  * DAQ: https://indico.cern.ch/event/837788/
  * FC7 nanocrate: https://indico.cern.ch/event/817056/contributions/3417073/attachments/1837344/3010849/190502_System_Test_Meeting_-_nanoCrate.pdf



====== Schematics ======

  * Disk PCB and HDI (David Wolf): https://www.physik.uzh.ch/~dwolf/CMS-TEPX/
  * Disk adapter ring 1: https://www.physik.uzh.ch/~leac/CMSPixel/Phase2/Boards/ring1adapter.pdf  
  * Disk adapter ring 3/5: https://www.physik.uzh.ch/~leac/CMSPixel/Phase2/Boards/ring35adapter.pdf  
  * Fanout board: https://www.physik.uzh.ch/~leac/CMSPixel/Phase2/Boards/Fanout.png  
  * DAQ boards: https://cms-tracker-daq.web.cern.ch/cms-tracker-daq/Downloads/
  * FC7: https://cms-tracker-daq.web.cern.ch/cms-tracker-daq/Downloads/FC7_Schematic.pdf
  * Kansas FMC: https://cms-tracker-daq.web.cern.ch/cms-tracker-daq/Downloads/FMC4SCCR1.pdf


====== Rate Calculations ======
  * Data compression (2017): https://indico.cern.ch/event/614319/contributions/2486519/attachments/1424025/2183679/pixeldatarate_030817.pdf
  * Hit rates (2018): https://indico.cern.ch/event/709594/contributions/2930131/attachments/1615361/2566932/Phase2_TracingResolution_digirates.pdf
 


====== Links ======
  * Phase 2 sharepoint: https://espace.cern.ch/Tracker-Upgrade/SitePages/Home.aspx
  * CMS tracker upgrade DOC DB: https://cms-docdb.cern.ch/cgi-bin/DocDB/ListBy?topicid=339
  * Phase 2 simulation layout repository: http://cms-tklayout.web.cern.ch/cms-tklayout/layouts/repository-git-master/

 
====== Related Talks and Documents ======

===== Tracker Week, Workshops and Project Reviews =====
   * Tracker Weeks:  https://indico.cern.ch/category/1080/
   * Tracker AR (May 2020): https://indico.cern.ch/event/909594/
   * Pisa Workshop (November 2019): https://indico.cern.ch/event/851184/
   * Tracker AR (May 2019): https://indico.cern.ch/event/793067/
   * IT mechanics review (April 2019): https://indico.cern.ch/event/809736/
   * IT mechanics review (December 2018): https://indico.cern.ch/event/770283/
   * IT mechanics review (June 2018): https://indico.cern.ch/event/735583/
   * EPIX/FPIX workshop (June 2018): https://indico.cern.ch/event/734199/
   * IT mechanics review (Feb 2018): https://indico.cern.ch/event/701333/
   * IT module design workshop (Dec 2017): https://indico.cern.ch/event/681678/


===== TEPX talks =====

=== TEPX testing ===
  * Marino (IT system test meeting, June 21): [[https://indico.cern.ch/event/1046634/contributions/4399029/attachments/2262098/3839821/210610_ph2ITSystems_psiTEPXberts.pdf|TEPX disk BER tests]]
  * Arne (IT system test meeting, May 21): [[https://indico.cern.ch/event/1041512/contributions/4383561/attachments/2253182/3822627/210527_BER_UZH.pdf|TEPX BER tests]]
  * Kyle (IT system test meeting, April 21): [[https://indico.cern.ch/event/1023152/contributions/4304213/attachments/2219938/3759224/TEPX_update_systems_meeting_Apr1_2021.pdf|TEPX disk testing]]
  * Arne (IT system test meeting, February 21): [[https://indico.cern.ch/event/1007357/contributions/4230600/attachments/2192631/3706166/210218_TEPX_Status.pdf|TEPX disk testing]]
  * Arne (IT system test meeting, January 21): [[https://indico.cern.ch/event/989804/contributions/4190583/attachments/2175751/3673944/210121_SerialPowering_UZH.pdf| SP ring 1]]
  * Arne (IT system test meeting, July 20): [[https://indico.cern.ch/event/942556/contributions/3960683/attachments/2082970/3498884/200730_PRBS.pdf|BER tests]]
  * Arash (IT modules meeting, Mai 2020): [[https://indico.cern.ch/event/914266/|Testing of TEPX disk with modules]] 
  * David (IT system test meeting, September 2019): [[https://indico.cern.ch/event/846191/|Testing of TEPX disk]]

=== TEPX modules ===
  * Arne (IT modules meeting, July 2021): [[https://indico.cern.ch/event/1060338/contributions/4455754/attachments/2285971/3885304/210722_TEPX_Modules.pdf| TEPX modules update]]
  * Marino (IT modules meeting, May 2021): [[https://indico.cern.ch/event/1026132/contributions/4333441/attachments/2238436/3794839/210504_ITModAndMech_tepxHighRateTests.pdf|TEPX modules high-rate test]] 
  * Arne (IT modules meeting, October 2020): [[https://indico.cern.ch/event/968973/contributions/4078277/attachments/2130593/3588004/201027_HDI_v2.pdf|TEPX HDI]]
  * Wolfram (IT modules meeting, October 2020): [[https://indico.cern.ch/event/968973/contributions/4080698/attachments/2130625/3588062/2020-10-27-IT-mechanics-coldbox.pdf|Cold Box]]
  * Arash (IT modules meeting, February 2020): [[https://indico.cern.ch/event/890289/contributions/3762203/attachments/1994129/3326694/Digital_TEPX_Quad_Module.pdf|TEPX digital modules]] 
  

=== TEPX design ===
  * Wolfram (TK week, July 2021): [[https://indico.cern.ch/event/1059214/contributions/4460911/attachments/2285871/3885130/2021-07-22-portcard-cabling.pdf|TEPX system]]
  * Wolfram (IT system test meeting, April 21): [[https://indico.cern.ch/event/1023152/contributions/4299805/attachments/2219942/3759053/2021-04-01-portcards.pdf|TEPX supply tube and portcards]]
  * Wolfram (IT system test meeting, Februray 21): [[https://indico.cern.ch/event/1007357/contributions/4230600/attachments/2192631/3706214/2021-02-18-diskpcb.pdf|TEPX disk PCB]]
  * Wolfram (IT modules meeting, November 2020): [[https://indico.cern.ch/event/973433/contributions/4098831/attachments/2140116/3605786/2020-11-10-TEPX-supplytube.pdf|TEPX supply tube]]
  * David (IT modules meeting, July 2019): [[https://indico.cern.ch/event/936959/|TEPX HDI revised design]]
  * Silvan (ICS meeting, September 2019): [[https://indico.cern.ch/event/844690/|TEPX rail geometry]] 
  * Wolfram (TK week, System Test meeting, July 2019):  [[https://indico.cern.ch/event/830972/contributions/3500052/attachments/1882221/3101655/2019-07-17-TEPX-system.pdf|TEPX system - electronics]] 
  * Silvan (TK week, Module meeting, July 2019): [[https://indico.cern.ch/event/830962/contributions/3503260/attachments/1881966/3101170/2019-07-17-TEPX-module-assembly.pdf|TEPX module assembly]] 
  * Anna (TK week, Module meeting, July 2019): [[https://indico.cern.ch/event/830962/contributions/3501002/attachments/1881901/3101044/HDI_TrackerWeek_2.pdf|TEPX modules and HDI]]
  * Lea (Mechanics meeting, May 2019): [[https://indico.cern.ch/event/823171/contributions/3446643/attachments/1852364/3041368/TEPX_28052019.pdf|Accomodation of new ROC dimensions in TEPX design]]
  * Wolfram (TK week, Mechanics meeting, May 2019):  [[https://indico.cern.ch/event/818373/contributions/3431222/attachments/1844631/3026293/2019-05-disk-material.pdf|Material comparison for different disk designs]]
  * David (System Test meeting, April 2019): [[https://indico.cern.ch/event/812883/contributions/3388935/attachments/1834445/3004995/20190424_Status-Disk.pdf|Disk PCB]]
  * Lea (Mechanics Review, April 2019): [[https://indico.cern.ch/event/809736/contributions/3384646/attachments/1829237/2995063/TEPX_update.pdf|TEPX overview]]
  * Stefanos (TK week - Mechanics meeting, March 2019): [[https://indico.cern.ch/event/801005/contributions/3330743/attachments/1807010/2949592/sleontsi_EPIXMechanicalDesign_19_03_06.pdf|Thermal simulations and options for module cooling contacts]]
  * Stefanos (TK week - Module meeting, March 2019): [[https://indico.cern.ch/event/801875/contributions/3338984/attachments/1807477/2950492/sleontsi_HDI_19_03_06.pdf|TEPX HDI design]]
  * Silvan (Mechanics Review, December 2018): [[https://indico.cern.ch/event/770283/contributions/3238440/attachments/1767622/2870720/TEPX-IT-Mechanics-Review_Dec-2018.pdf|TEPX overview and material estimates]]
  * Wolfram (TEPX mechanics, Tracker week, November 2018): [[https://indico.cern.ch/event/768502/contributions/3206197/attachments/1747993/2830971/2018-11-07-tepx-installation.pdf|TEPX installation]]
  * Lea (Layout Discussion, October 2018): [[https://indico.cern.ch/event/746593/contributions/3164208/attachments/1726785/2789605/EPIX_Geometry_02102018.pdf|TEPX design, choice of 2x2 modules, disk arrangement]]
  * Lea (Layout Discussion, September 2018): [[https://www.physik.uzh.ch/~leac/CMSPixel/Phase2/Talks/EPIX_Geometry_12092018.pdf|TEPX design options]]  
  * Stefanos (Mechanics Review, June 2018): [[https://indico.cern.ch/event/735583/contributions/3047318/attachments/1677582/2693879/sleontsi_EPIXMechanicalDesign_18_06_29.pdf|TEPX overview]]
  * Wolfram (TK week, Mai 2018): [[https://indico.cern.ch/event/722390/contributions/3006491/attachments/1651158/2640914/2018-05-16-TEPX.pdf|TEPX module arrangement on disk]]

=== TEPX simulation ===
  * Ian (TK Phase 2 simulation meeting, March 2019): [[https://indico.cern.ch/event/809429/contributions/3371922/attachments/1820667/2977691/Configuration_Analysis.pdf | Impact of different design choices for TEPX cooling]]
  * Danyyl (TK Phase 2 simulation meeting, October 2018): [[https://indico.cern.ch/event/750047/contributions/3175944/attachments/1737471/2810690/TPEX_geometry_optimization_2.pdf|Impact of 2x2 module geometry and TEPX disk arrangement]]
  * Danyyl (TK Phase 2 simulation meeting, September 2018): [[https://indico.cern.ch/event/688852/contributions/3131012/attachments/1712300/2760872/TEPX_geometry_optimization.pdf|Impact of 1x1 module geometry and TEPX disk arrangement]]


=== Updates in simulation relevant for TEPX ===
  * Gabrielle (TK Phase 2 simulation meeting, July 2019): [[https://indico.cern.ch/event/830930/contributions/3499192/attachments/1880130/3101992/various_updates_from_tkLayout.pdf|Status of tklayout updates]]
  * Juliette (TK Phase 2 simulation meeting, June 2019): [[https://indico.cern.ch/event/809434/contributions/3458253/attachments/1857941/3053745/D42vsD41_TrackerPhaseIISimMeeting_7June2019.pdf|RelVal of T15]]
  * Gabrielle (TK Phase 2 simulation meeting, May 2019): [[https://indico.cern.ch/event/818271/contributions/3426860/attachments/1842756/3022082/Phase2_Inner_Tracker_MB.pdf|T15: TEPX material update]]
  * Gabrielle (TK Phase 2 simulation meeting, April 2019): [[https://indico.cern.ch/event/809431/contributions/3409404/attachments/1835209/3007461/IT_materials_update_in_tkLayout.pdf|Status of material updates in tklayout]]
  * Gabrielle (TK Phase 2 simulation meeting, March 2019): [[https://indico.cern.ch/event/801769/contributions/3338145/attachments/1805296/2977341/status_report_from_tkLayout.pdf|T14: TEPX disk arrangement]]
  * Gabrielle (TK Phase 2 simulation meeting, March 2019): [[https://indico.cern.ch/event/794769/contributions/3338122/attachments/1804826/2944937/IT_MB.pdf|Status of material updates in tklayout]]
  * Gabrielle (TK Phase 2 simulation meeting, January 2019): [[https://indico.cern.ch/event/777362/contributions/3282899/attachments/1781515/2899365/hugo.pdf|Status of material updates in tklayout]]
 
 
  
 
  

===== Other Talks =====
  * [[https://indico.cern.ch/event/681247/contributions/2928992/attachments/1638547/2615288/aces2018_kulis_lpgbt.pdf|ACES 2018 lpGBT status]]
  * [[https://indico.cern.ch/event/681247/contributions/2928993/attachments/1638778/2624065/VLplus_ACES_Vasey_24Apr2018_V4.pdf|ACES 2018 VL+ status]]
  * [[https://espace.cern.ch/Tracker-Upgrade/mechanics/_layouts/WopiFrame2.aspx?sourcedoc=/Tracker-Upgrade/mechanics/Shared%20Documents/Tracker_Integration,_Design_Parameters,_General_requirements/Inner_Tracker_and_ITST_integration_aspects/2018-02-07_IT_detector_design_constraints_Integration%20aspects.pptx&action=default&Source=https%3A%2F%2Fespace%2Ecern%2Ech%2FTracker-Upgrade%2Fmechanics%2FShared%2520Documents%2FForms%2FAllItems%2Easpx%3FRootFolder%3D%252FTracker%252DUpgrade%252Fmechanics%252FShared%2520Documents%252FTracker%255FIntegration%252C%255FDesign%255FParameters%252C%255FGeneral%255Frequirements%252FInner%255FTracker%255Fand%255FITST%255Fintegration%255Faspects%26FolderCTID%3D0x012000D34CA5B6EEF7C64089891DC567865A36&DefaultItemOpen=1|Installation Video (2018)]]
Physik-Institut

CMS Wiki Pages

User Tools

Site Tools

Page Tools
