Implement procedure for full chain test including all tests we did so far: CCU redundancy, i2c programming, DOH/PLL setting, Delay25 scan for SDA, Delay25 scan for RDA, …
Check LV and HV distribution
Check that reset does not trigger cross-talk
Implement reading of QPLL pia register
Digital FED
Check TBMPLL delay settings
Optical signals
Perform BER
Hardware
Power and load board: equip L12 CB with power cables. Measure voltage drops for L12.
Test CB L4
Test POHs
Pixel Online Software
Implement modules for L1, L2, L34
Check reading from FIFO3 (to use calibrations implemented by pilot)
Implement POH bias scan using TBM header counting (for given TBM/ROC delay settings)