====== Basic checks of VME crate and communication ======
====Firmware====
    cd VME/caen-firmware-version
    ./firmware

    This mini program reads out the versions of the CAENVME library,
    the firmware of the three boards
      A2818 (PCI card)
      A2719 (optical link add-on)
      V2718 (VME conroller card)
    This program should only be run if no other program accesses the
    VME bridge. Otherwise data corruption or prgram crashes could occur.
    Software release : 2.41.0
    A3818 firmware   : 1.00
    A2719 firmware   : 1.05
    V2718 firmware   : 2.14
    V1718 firmware   :       
    
====Test FEDs====
    cd VME/CAEN
    ./test_feds.exe 

    Open VME interface 0
    ...
    FED read OK, FED = 2, Slot= 5, Base= 11000000, GA data 0
    Firmware version :  606140c 606140c 606140c 606140c 1704140c
    ...
    FED read test done 


====Test FECs====
    cd VME/CAEN
    ./test_fecs.exe 

     Open VME interface 0
     ...
     ----------------
     FEC in slot 12, BaseAddress = 60000000
      ID_REG 60000300 value = 21- sysid = 0 version 2 subversion 1
      This FEC is in unknown mode : 0
      CONFIG0 60000304 value = b8- sysid = 0
      This FEC is in unknown mode 0
      STATUS 6000030c value = 8e100003- TTCrx READY  QPLL LOCKED 
      VME firmware version 600002cc value = 16
     ----------------
     FEC in slot 13, BaseAddress = 68000000
      ID_REG 68000300 value = 4016- sysid = 4 version 1 subversion 6
      This FEC is in pixel mode
      CONFIG0 68000304 value = 40b8- sysid = 4
      This FEC is in pixel mode
      STATUS 6800030c value = 8edc0001- TTCrx READY  QPLL NOT Locked??? 
      VME firmware version 680002cc value = 16
      
      
====Test TTC====
    cd /opt/xdaq.bin
    ./TTCVersions.exe 

    CAEN Software: version 2.41.0
    CAEN A2818 (PCI board)     : Firmware version 1.00
    CAEN A2719 (Optical board) : Firmware version 1.05
    CAEN V2718 (VME-PCI bridge): Firmware version 2.14
    CAEN V1718 (VME-USB bridge): Not detected
    WARN - Warning: no bus adapter specified --> falling back to 'CAENPCI'
    INFO - Trying to instantiate CAENPCI bus adapter object
    INFO - Instantiated CAENLinuxBusAdapter (A2818 PCI card connected to V2718 VME controller).
    INFO - VME64xPNP: Scanning crate for VME64x modules...
    INFO - Position:       Slot 3
    Enabled:        Yes
    ManufacturerId: 080030   (CERN)
    BoardId:        00000162 ()
    RevisionId:     -
    Serial Number:  -
    Description:    -
    ...