====== To Do List ======

  



===== Power =====

  * Check power pigtails in system


===== Full chain test =====

  * Implement procedure for full chain test including all tests we did so far: CCU redundancy, i2c programming, DOH/PLL setting, Delay25 scan for SDA, Delay25 scan for RDA, ...
  * Check LV and HV distribution
  * Check that reset does not trigger cross-talk
  * Implement reading of QPLL pia register




===== Digital FED =====

  * Check TBMPLL delay settings


===== Optical signals =====

  * Perform BER

===== Hardware =====

  * Power and load board: equip L12 CB with power cables. Measure voltage drops for L12.
  * Test CB L4
  * Test POHs

===== Pixel Online Software =====

  * Implement modules for L1, L2, L34
  * Check reading from FIFO3 (to use calibrations implemented by pilot)
  * Implement POH bias scan using TBM header counting (for given TBM/ROC delay settings)
  * Run S-curve and compare noise to module test